RBA Posted November 7, 2023 Report Posted November 7, 2023 Hallo Angelfreunde, ich habe das Problem, das irgendwann wärend der Auswerfens der Begriff "Klemmen" in der Auswurfanzeige erscheint. Er begrent dann meine Auswurfweite auf eine gewiss/ kürzere Entfernung. Wodurch passiert das und wie kann ich das unterbinden oder verhindern. Petri Heil und viele Grüße Ralf Quote
RBA Posted November 9, 2023 Author Report Posted November 9, 2023 On 11/7/2023 at 6:18 PM, RBA said: Hallo Angelfreunde, ich habe das Problem, das irgendwann wärend der Auswerfens der Begriff "Klemmen" in der Auswurfanzeige erscheint. Er begrent dann meine Auswurfweite auf eine gewiss/ kürzere Entfernung. Wodurch passiert das und wie kann ich das unterbinden oder verhindern. Petri Heil und viele Grüße Ralf Hello fishing friends, I have the problem that at some point during casting the term "jamming" / "klemmen" appears in the casting display. It then limits my casting distance to a certain/shorter distance. What causes this and how can I stop or prevent it? Good luck and best regards Ralf Quote
PH_Carpman99 Posted November 10, 2023 Report Posted November 10, 2023 You might have the line clipped, try pressing both bumper buttons together at the same time to unclip it. If the line is clipped the line length would show another number in front of the total line length (i.e. 20 m/100 m (clipped to cast only 20 metres) instead of just 100 m (metres)). Quote
RBA Posted November 11, 2023 Author Report Posted November 11, 2023 Hello, thanks a lot for answering. Very kind ! I'am not sure, what "bumper buttons" means. Please can you explain. All the best Ralf Quote
PH_Carpman99 Posted November 11, 2023 Report Posted November 11, 2023 On your controller you have the left and right trigger buttons, above them are the "bumper" buttons. Try pressing them both at the same time. Quote
RBA Posted November 13, 2023 Author Report Posted November 13, 2023 Thanks, but i'am gaming on windows PC Quote
PH_Carpman99 Posted November 13, 2023 Report Posted November 13, 2023 Once you've made a cast press C to clip or unclip, or you can try pressing the mouse wheel down to do the same thing (thought you were using a console as you posted in the German Xbox One forum). Quote
RBA Posted November 14, 2023 Author Report Posted November 14, 2023 Thank's a lot for your effort. Very kind !!! I will try it. All te best Ralf Quote
PH_Carpman99 Posted November 16, 2023 Report Posted November 16, 2023 Hoffentlich behebt das das Problem. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.