July 30, 20179 yr Power Members This may be old news to some, but hopefully it will be helpful to others. When fishing in real life setting our drag correctly is primarily done by feel; however, here in the game it's just a matter of simple math. Here's what I do whenever I do a new set up or change line weight on a current set up. 1. I make sure the line weight is correct for that rod. 2. I make sure the line weight is below the maximum drag of the reel (this will limit unnecessary wear on the reel). 3. Different reels have a different number of drag settings (6, 8, or 12). Once you know the number of settings on the reel, simply divide the maximum drag of the reel by the number of settings. Now you know the exact amount of drag each setting has. I always adjust my drag so it is at least a half pound to one pound lower than the line weight, There are exceptions though. For example, I use a Thunderspin 6000 which has 24.2 pounds of maximum drag with 25 pound line. If I set the drag to max I'll place excessive wear on the reel, but running the drag at 1 click below maximum it works just fine. This should give you the most efficient use of rod, reel, and line. Good Luck and tight lines! Edited July 30, 20179 yr by PH_Hilrond
September 13, 20179 yr I start conservative with around 75% of reel breakdown for that line. You can always adjust it tighter during the fight (+ and -). When the reel is gone by a hard hooking - you can´t adjust anything
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.