April 14, 20188 yr Hello, relatively new player here. I had no issues on any other body of water till I got to Oregon. I keep getting spooled by fish and it's not that my tension gauge goes up, it stays in the blue the whole time. The fish are not strong enough to break me off at the max length of line yet I can't reel anything in after 10 seconds, they just keep pulling line out afterwards. I'm sure I am doing something wrong but I can't figure it out. I understand the basic concepts, don't reel while the fish is running, change rod directions, etc. I understand (I think) how reels and line works with the max drag etc. I just don't know what I am doing wrong. Probably missing a simple button. It happens on every rod, My Setup as follow. This is unbelievably frustrating. Oh I'm rank 18 if it matters. Rod: JigWinner 7'10", Line weight 3-12 Reel: EspireMLR 2000, Max Drag 11lb Line: Everything from 6lb up to 10lb all kinds that I have unlocked. and Rod: Jester 7', Line weight 5-11.5lb Reel: LowDexMG 1000 P, Max Drag 10.5Lb Line: Same as above. Edited April 14, 20188 yr by RiverFisher
April 14, 20188 yr Power Members I think I understand what you mean, but im not sure whats causing it. Do you play on pc? If so, maybe we can join up in Oregon and you can show me whats happening. Maybe we can find out whats going on. Just leave a reply here and we'll coordinate.
April 14, 20188 yr Author Hey mate, thanks for the reply. Sorry I am on PS4. I'll try to clarify a bit better was 4am when I wrote that and I was pissy haha. But when I hook what I assume is a decent sized rainbow or brown (largest I have caught is around 4lbs) everything is normal for the first 10-15 seconds. I can usually reel it in to around 26 or so feet but then it just starts running and there is nothing I can do to stop it. I usually have around 230 feet of line and it'll take it all out within a minute. The kicker is that when the fish gets to the end of the line it still doesn't break me off, tension gauge does not fill up and stays near the bottom maybe 3-4 bars up in the blue. I will have full drag on and it does nothing, doesn't stop the fish, doesn't increase the tension once it starts the run, nothing. And apparently I am at the near max "optimization" of the tackle to, as when I do catch a rainbow I get the red arrow of lower experience. Edited April 14, 20188 yr by RiverFisher
September 5, 20188 yr 'drag' setting and 'reel speed' are two diff things , use 8lb line with that rod/reel and set drag up to where you see pinkish/redish on the drag and use 'hold' right click to 'break' the fishes run and NEVER stop reeling in .... you have to 'work' these trout as they will run in on you , you need to tire them out by breaking their runs. good luck
September 7, 20188 yr RiverFisher, As Michael posted just prior to this post, reel speed and drag settings are different. However, they are often confused. Reel speed will be little '^' arrows in the middle of the circle where your reel shows on the right side of the screen. The drag is the lines/blocks going clockwise around the reel. Double check to ensure you're turning drag up, and not reel speed. This sounds as if your drag is set to the lowest point, rather than higher up. If you continue to have the issue, post a screen shot here in the forums so that the devs can have a look, in case it's a bug. Thanks bud! Tight Lines, PH_Showstorm
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.