February 17, 20251 yr My character moves forward on its own. Its almost like he is stuck in go forward mode. This can be countered temporarily by going backwards, but then it starts again in a few seconds. Same things happens with menus. It scrolls through options blazingly fast so makes it very difficult to select a mission or an item. I read elsewhere of people having this issue on PC platform and it was due to having additional USB devices plugged in. They resolved it by unplugging those devices. This is Xbox, so none of that exists. Help?
February 18, 20251 yr Reset your Xbox One controller This is more of a restart than a full reset, but it could still resolve your issue. Press and hold the Xbox button on the controller for 5–10 seconds until it turns off. Wait a few seconds, and then press and hold the Xbox button again to turn it back on. Replace the batteries Slide off the back cover of the controller and replace the AA batteries with two fresh ones. If you have a reusable battery pack, charge your controller until it's at full power. Clean your Xbox One controller First, disconnect and turn off your controller by pressing the Xbox button for 5–10 seconds. Then apply a small amount of rubbing alcohol to a cotton swab or soft cloth and wipe the analog stick, especially at the base. Move the stick around as you clean so you can cover more area. Repeat this process for the other analog stick. Before moving to the next step, wait for the alcohol to completely dry. To clean your Xbox controller using canned air: Compressed air should help clear out any debris that's causing controller drift. One important tip: Always keep the can level when spraying the joysticks as turning it sideways could send moisture into your controller and cause further damage. Here's what else you should do to clean it safely: With the controller off, press one analog stick as far as it will go in one direction and then spray the compressed air into the stick base on the opposite side. Slowly roll the stick around while continuously spraying the base with air. As you spray, try gently pulling the analog stick up or pressing it down while you push it all the way to one side. This can help create space for the air to enter. Repeat this process with the other analog stick. Even if your controller is working properly, spraying it with compressed air about once a month will help keep it clean and prolong its life. Have you got another controller to see if it happens with that controller as well?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.